Wednesday, March 30, 2011
Peak Inside ~ Mandy's Living Room
My best friend Mandy has always been an inspiration for me fashion wise, so it was no surprise that when she and her husband Bryan purchased their first home, I was very inspired by her design sense. An Interior Architect by trade, Mandy has always had a keen eye for detail, and pairing unexpected elements. I love how she incorporates mid century pieces that play off the architectural details in the home, while still keeping everything fresh and modern.
Monday, March 28, 2011
DIY Trays Part Two ~ Monogrammed Tray
Yesterday we covered DIY marbled clay trays, and today we move on to a customized monogrammed tray. Monograms are something I've been crushing on for a while now, and I wanted to incorporate one into our decor in an inexpensive way.
All that you need for this project is Gloss Enamel paint,a paint brush, a white plate ( I got mine at a dollar store for $2) some cotton swabs, and an oven. (Hint, dollar store cotton swabs work best because they seem to be more compact than the name brand options)
First, clean the plate with rubbing alcohol to remove any grime that may be left on it and prevent the paint from sticking. I found it quite difficult to apply the paint in an even layer ( I used Americana Gloss Enamels in Razzle Berry), so I decided to go with it and used short strokes to create a textured surface. When the paint is still wet, take the cotton swab and trace out the monogram. After the top dried, I flipped it over and painted the bottom gold, using short strokes to create texture.
After letting the paint dry for 48 hours, it was time to put it in the oven for 30 minutes.
The finished product
All that you need for this project is Gloss Enamel paint,a paint brush, a white plate ( I got mine at a dollar store for $2) some cotton swabs, and an oven. (Hint, dollar store cotton swabs work best because they seem to be more compact than the name brand options)
First, clean the plate with rubbing alcohol to remove any grime that may be left on it and prevent the paint from sticking. I found it quite difficult to apply the paint in an even layer ( I used Americana Gloss Enamels in Razzle Berry), so I decided to go with it and used short strokes to create a textured surface. When the paint is still wet, take the cotton swab and trace out the monogram. After the top dried, I flipped it over and painted the bottom gold, using short strokes to create texture.
After letting the paint dry for 48 hours, it was time to put it in the oven for 30 minutes.
The finished product
Sunday, March 27, 2011
DIY Trays Part One ~ Marbled Clay Tray
So this weekend I ended up going a little tray crazy on the DIY front. The first technique I'm going to feature is using oven bake clay.
I came up with this idea after wandering the isles at Michael's and seeing these three beautiful shades of purple clay, and gold enamel.
As soon as i saw these colors, I was instantly reminded of Kelly Wearstlers pink office that I featured in my monochromatic room post. I immediately got to work ,mixing up the colors to create a marbled effect. I found the best way to get a marbled look without mushing everything together into one color, was to start with long rolls of each color, and then rubbing them together in my hand, folding it over, and continuing until the colors had dispersed to my liking.
After flattening out and shaping the trays, I used gold gloss enamel paint to rim the edges. After letting the paint cure for 48 hours, they were ready for the oven.
After 15 minutes (Check your clay for specific cooking times) they were ready for a coat of clear gloss coating. I used Krylon Low Odor Clear Gloss spray, which you can get here.
The finished products
Come back tomorrow to see our DIY monogramed tray!
I came up with this idea after wandering the isles at Michael's and seeing these three beautiful shades of purple clay, and gold enamel.
As soon as i saw these colors, I was instantly reminded of Kelly Wearstlers pink office that I featured in my monochromatic room post. I immediately got to work ,mixing up the colors to create a marbled effect. I found the best way to get a marbled look without mushing everything together into one color, was to start with long rolls of each color, and then rubbing them together in my hand, folding it over, and continuing until the colors had dispersed to my liking.
After flattening out and shaping the trays, I used gold gloss enamel paint to rim the edges. After letting the paint cure for 48 hours, they were ready for the oven.
After 15 minutes (Check your clay for specific cooking times) they were ready for a coat of clear gloss coating. I used Krylon Low Odor Clear Gloss spray, which you can get here.
The finished products
Come back tomorrow to see our DIY monogramed tray!
Friday, March 18, 2011
Brighten up your kitchen
It's finally starting to feel like spring here, which is inspiring me to brighten up my kitchen. Sunny yellows, bright greens and shades of honeysuckle will brighten even the darkest kitchen. Adding a few pops of color , in the form of everyday accessories, is an easy way to change the feel of your kitchen and welcome a new season.
1. KitchenAid Stand Mixer 2. Anthropologie 3. Anthropologie 4. Michelle Smith 5 to 8. Anthropologie
Wednesday, March 16, 2011
Little Luxuries...Voluspa Candles
Words cannot express how much I love Voluspa Candles. If you told me a year ago that I would be waxing poetic about a candle (pun intended) I would have told you that you were crazy.
I was first drawn to how beautifully packaged they were, they are accessories in their own right. Then comes the smell...oh the smell. I have never used a candle that dispersed scent so well throughout the house, all without ever seeming overpowering. All their scents are complex ,sophisticated, and inviting.
My current favorite is the 2 wick metallo in Lichen & Vetiver. Its beautiful on my coffee table and ,when lit, the scent from just one candle wafts from my main floor all the way up my staircase to the second floor. I have yet to have a visitor that has not commented, more than once, on how amazing it smells. I actually have to stop myself from opening it up and smelling it every time I walk by.
With scents such as Apricot & Aiprilla, Laguna, Pomegranate Patchouli, French cade & Lavender, and Santiago Huckleberry, its very hard to choose just one favorite.
I was first drawn to how beautifully packaged they were, they are accessories in their own right. Then comes the smell...oh the smell. I have never used a candle that dispersed scent so well throughout the house, all without ever seeming overpowering. All their scents are complex ,sophisticated, and inviting.
My current favorite is the 2 wick metallo in Lichen & Vetiver. Its beautiful on my coffee table and ,when lit, the scent from just one candle wafts from my main floor all the way up my staircase to the second floor. I have yet to have a visitor that has not commented, more than once, on how amazing it smells. I actually have to stop myself from opening it up and smelling it every time I walk by.
With scents such as Apricot & Aiprilla, Laguna, Pomegranate Patchouli, French cade & Lavender, and Santiago Huckleberry, its very hard to choose just one favorite.
 |
| 1. White Currant Quince porcelin2. Makassar Ebony & Peach 3 wick in decorative tin 3. Gardenia Colonia two wick Metallo 4. Warm Perique Tabac Classic Maison Candle 5. Japonica travel set |
Tuesday, March 15, 2011
My DIY Console Table
There are many design blogs that I love to check out everyday. One I particularly like is Johns Journal. Maria's console table DIY on Design*Sponge inspired me to follow suit when I couldn't find a table for our entry way that was just right.
All it took was some hardwood from Home Depot, some faux leather Contac Paper, and some nail heads.
Voila! All for under $30
My Version
Maria's Version
Check out Maria's blog here and tutorial here.
All it took was some hardwood from Home Depot, some faux leather Contac Paper, and some nail heads.
Voila! All for under $30
My Version
 |
| House of Movi |
Maria's Version
 |
| Johns Journal |
Check out Maria's blog here and tutorial here.
Thursday, March 10, 2011
DIY Curtains For An Oversized Window
As I have stated before in this post, I love the 11 ft ceilings in our dining area, but they do pose a few design related challenges. When we moved in, one of the main challenges we faced was finding drapery for the oversized windows. It seemed simple enough, all I wanted was two toned curtains that I could hang near the ceiling to play up the rooms height. I quickly discovered that it is next to impossible to find 132" ready made curtains, and custom quotes came in at around $1000. Although I could have bought fabric, it still would have been pricey, and I'm barely what you would call a whiz with a sewing machine.
Our DIY solution ended up costing a whopping $140 including the curtain rod! Best of all it's no sew, all you need is an iron and a pair of scissors. It's so easy I feel bad even calling it a DIY.
1. I bought two sets of Ikea Ritva curtains, one in white, one in grey.
2. Decide which color curtain you want to be dominant and lay it face down on a flat clean surface.
3. Subtract the length of the curtain from the height of your wall/window to figure out how much you need to cut from your secondary pair of curtains.
4. When cutting the secondary curtains, be sure to cut above the bottom hem to keep it intact(remember to add a few inches to allow for shrinkage and to let it pool a little on the floor)
5. Flip up the hem of the dominant curtain and iron a crease in it so it lays down flat.
6. Lay the enclosed iron on hemming strip on the hem, and place the cut side of the secondary curtain on top, and slowly iron, fusing the two together. Work in small sections, making sure enough heat is being applied to fuse it properly. (Before you start, be sure to check that the secondary curtain is facing down.)
7. Once you are finished, flip the curtain over, and iron to create a crease on the secondary curtain so it lies flat against the primary curtain.
8. Repeat, hang and enjoy!
A great affordable long curtain rod is the Crystal ball curtain rod from Martha Stewart Living that you can pick up at Home Depot. It's longest length is 144" and only costs $59.99
The finished product
Our DIY solution ended up costing a whopping $140 including the curtain rod! Best of all it's no sew, all you need is an iron and a pair of scissors. It's so easy I feel bad even calling it a DIY.
1. I bought two sets of Ikea Ritva curtains, one in white, one in grey.
2. Decide which color curtain you want to be dominant and lay it face down on a flat clean surface.
3. Subtract the length of the curtain from the height of your wall/window to figure out how much you need to cut from your secondary pair of curtains.
4. When cutting the secondary curtains, be sure to cut above the bottom hem to keep it intact(remember to add a few inches to allow for shrinkage and to let it pool a little on the floor)
5. Flip up the hem of the dominant curtain and iron a crease in it so it lays down flat.
6. Lay the enclosed iron on hemming strip on the hem, and place the cut side of the secondary curtain on top, and slowly iron, fusing the two together. Work in small sections, making sure enough heat is being applied to fuse it properly. (Before you start, be sure to check that the secondary curtain is facing down.)
7. Once you are finished, flip the curtain over, and iron to create a crease on the secondary curtain so it lies flat against the primary curtain.
8. Repeat, hang and enjoy!
A great affordable long curtain rod is the Crystal ball curtain rod from Martha Stewart Living that you can pick up at Home Depot. It's longest length is 144" and only costs $59.99
The finished product
 |
| House of Movi |
Sunday, March 6, 2011
Shopping for Pillows
Pillows are the perfect finishing touch in a room. They pull everything together, and can add a needed pop of color or texture.
The most important thing to look for when selecting pillows is variety. A couch with four identical pillows can easily look boring. I find a good rule of thumb is to keep the numbers odd, and make sure you vary the material, pattern or hue. For example, a bed with five identical hot pink pillows could look flat and staged. A bed with two velvet hot pink pillows, one pink and white Ikat pillow, one rose striped pillow, and one blush colored cotton pillow would look a lot fresher, and have more visual interest.
All of these have stolen my heart and put a smile on my face.
1. Not your average Giraffe Print Chintz and Co 2. Teal Velvet Crate and Barrel 3. Fun Geometric Modern Chic Home 4. Metallic Snake skin ABC Home 5. Touch of Aubergine Crate and Barrel 6. Elegant Trellis Decorative Instincts 7. Lovely chevron ikat fabricadabra 8. Neutral but not plain ABC Home
The most important thing to look for when selecting pillows is variety. A couch with four identical pillows can easily look boring. I find a good rule of thumb is to keep the numbers odd, and make sure you vary the material, pattern or hue. For example, a bed with five identical hot pink pillows could look flat and staged. A bed with two velvet hot pink pillows, one pink and white Ikat pillow, one rose striped pillow, and one blush colored cotton pillow would look a lot fresher, and have more visual interest.
All of these have stolen my heart and put a smile on my face.
1. Not your average Giraffe Print Chintz and Co 2. Teal Velvet Crate and Barrel 3. Fun Geometric Modern Chic Home 4. Metallic Snake skin ABC Home 5. Touch of Aubergine Crate and Barrel 6. Elegant Trellis Decorative Instincts 7. Lovely chevron ikat fabricadabra 8. Neutral but not plain ABC Home
Friday, March 4, 2011
How-to transform a paper lantern into a permanant fixture
Although I love my dining area, it's 11 foot high ceilings pose a bit of a challenge when it comes to lighting. I knew we would need a large, high impact fixture, especially since our house is open concept. But, for some reason, I felt that anything sparkly would be too much.
I decided that an oversized paper lantern was just what we needed.
The only problem? After searching every blog and website I could think of , I could not, for the life of me, find a paper lantern that was not hung with a cord socket that had to be plugged into an outlet. I was careful to make sure the lantern looked intentional, not like a temporary replacement for a chandelier. The last thing I wanted was a cord running across my ceiling and down the wall.
A few weeks later I found that what I was looking for was called a canopy kit. A canopy kit lets you attach any pendant to the ceiling permanently. Unfortunately all the canopy kits I could find still had a plain cord hanging down, and I was looking for something a little bit more polished.
Enter this pendant from Home Depot for only $29.99. It was the perfect compliment to the lantern, and had three different lengths in a brushed nickel finish.
When installing the fixture I added all three links to allow for the greatest length , and left out the shade. I found my 36" paper lantern at the aptly named Paper Lantern Store. Attaching the paper shade without ripping it was a bit tricky, but after using pliers to close the rounded top of the lantern, it stayed in place perfectly. Be sure to keep the light bulb in the middle of the lantern to avoid a fire hazard.
The finished product...
We still have a bit of decorating to do in the dining room, but I'm really liking the direction it's headed.
I decided that an oversized paper lantern was just what we needed.
The only problem? After searching every blog and website I could think of , I could not, for the life of me, find a paper lantern that was not hung with a cord socket that had to be plugged into an outlet. I was careful to make sure the lantern looked intentional, not like a temporary replacement for a chandelier. The last thing I wanted was a cord running across my ceiling and down the wall.
A few weeks later I found that what I was looking for was called a canopy kit. A canopy kit lets you attach any pendant to the ceiling permanently. Unfortunately all the canopy kits I could find still had a plain cord hanging down, and I was looking for something a little bit more polished.
Enter this pendant from Home Depot for only $29.99. It was the perfect compliment to the lantern, and had three different lengths in a brushed nickel finish.
 |
| Home Depot |
When installing the fixture I added all three links to allow for the greatest length , and left out the shade. I found my 36" paper lantern at the aptly named Paper Lantern Store. Attaching the paper shade without ripping it was a bit tricky, but after using pliers to close the rounded top of the lantern, it stayed in place perfectly. Be sure to keep the light bulb in the middle of the lantern to avoid a fire hazard.
The finished product...
 |
| House of Movi |
We still have a bit of decorating to do in the dining room, but I'm really liking the direction it's headed.
Thursday, March 3, 2011
Before and After: Thrift dining chair
I love how someones junk can become somebody else's treasure. I especially love it when that treasure is mine.
Last year I bought this sad old dining chair at a thrift shop, despite the fact that I had no clue what I wanted to do with it. After months of deliberating between painting the chair white or keeping the wood finish, I decided on an antique white finish, paired with this modern wide horizontal striped fabric from Ikea.
This is how it looked when I picked it up for $12 at the local Value Village
Then I got to work with some primer, soy based paint remover, sandpaper, and a staple gun.
The step by step:
(Am I the only one who wants to belt out NKOTB when they hear that?)
1. Remove the cushions and store the screws in a labeled zip lock bag (you will thank me for this later, I promise).
2. Gently sand down the frame with 220 grit sandpaper, and wipe with a damp cloth.
3. Apply two coats of a white interior primer with a small brush. I used Essentials primer from CIL that you can find here.
4. Apply a thick coat of soy based latex paint remover, and let process for the recommended time. I used Smart Strip aerosol paint remover, and it worked perfectly.
5. After the remover has set, scrape off enough paint to get your desired look. Once it dries, sand again with 220 grit sandpaper to dull any too perfect spots, and help the primer "meld" with the wood.
6. Repeat steps 4 and 5 if needed, and wipe with a damp cloth when fully dry.
7. Tear old fabric and foam off cushion
8. Secure new foam to board with spray adhesive, and trim any excess foam from around the edges. ( Most craft stores will sell easy to use, chair sized pads of foam just for this purpose)
9. Lay out your (freshly ironed) fabric, print side down and place your seat, foam side down on top of it. Starting with the front edge of the seat, pull the fabric taut and staple in the middle. Turn it around, and repeat on the other side. Once you have secured all four sides, continue to move around the chair, keeping the fabric taut, and secure every inch or so. When you get to the corners, take care to gather the fabric, folding gently, and stapling to avoid creases. A great video on how to re-upholster a dining seat can be found here.
10. Cut away any excess fabric, and re-attach seat to the base using the wood screws you set aside earlier.
Last year I bought this sad old dining chair at a thrift shop, despite the fact that I had no clue what I wanted to do with it. After months of deliberating between painting the chair white or keeping the wood finish, I decided on an antique white finish, paired with this modern wide horizontal striped fabric from Ikea.
This is how it looked when I picked it up for $12 at the local Value Village
 |
| Before |
Then I got to work with some primer, soy based paint remover, sandpaper, and a staple gun.
 |
| House of Movi ~ After |
 | ||
| House of Movi ~ After |
The step by step:
(Am I the only one who wants to belt out NKOTB when they hear that?)
1. Remove the cushions and store the screws in a labeled zip lock bag (you will thank me for this later, I promise).
2. Gently sand down the frame with 220 grit sandpaper, and wipe with a damp cloth.
3. Apply two coats of a white interior primer with a small brush. I used Essentials primer from CIL that you can find here.
4. Apply a thick coat of soy based latex paint remover, and let process for the recommended time. I used Smart Strip aerosol paint remover, and it worked perfectly.
5. After the remover has set, scrape off enough paint to get your desired look. Once it dries, sand again with 220 grit sandpaper to dull any too perfect spots, and help the primer "meld" with the wood.
6. Repeat steps 4 and 5 if needed, and wipe with a damp cloth when fully dry.
7. Tear old fabric and foam off cushion
8. Secure new foam to board with spray adhesive, and trim any excess foam from around the edges. ( Most craft stores will sell easy to use, chair sized pads of foam just for this purpose)
9. Lay out your (freshly ironed) fabric, print side down and place your seat, foam side down on top of it. Starting with the front edge of the seat, pull the fabric taut and staple in the middle. Turn it around, and repeat on the other side. Once you have secured all four sides, continue to move around the chair, keeping the fabric taut, and secure every inch or so. When you get to the corners, take care to gather the fabric, folding gently, and stapling to avoid creases. A great video on how to re-upholster a dining seat can be found here.
10. Cut away any excess fabric, and re-attach seat to the base using the wood screws you set aside earlier.
Subscribe to:
Posts (Atom)
